Why buy a non-temperature calibration device designed for test tube sterilization or PC board repair when you can have a true calibration instrument? The 3125 has a uniform surface temperature and reaches temperatures as high as 400C.
The test surface is milled aluminum for an absolutely smooth and true calibration work area with maximum thermal conductivity. The 12.25-square-inch test surface is large enough to calibrate more than one sensor at a time. The 3125 can be used with a reference surface sensor or PRT. PRTs (3/16" diameter, such as the 5615) may be inserted through a drilled hole into the center of the block for use as reference thermometers or for easy recalibration of the unit’s display.
With an accuracy of 0.5 C to 200 C and 1 C to 400 C, you can calibrate almost any surface probe, thermistor, thin film sensor, RTD, thermocouple, ribbon sensor, or surface mount cutouts, fuses, and switches. Stability is within 0.3 C at 400 C and uniformity within the center three inches of the surface is 0.6 C at 200 C. Don’t buy make-do" hot plates when you can have a legitimate calibration tool.

Specifications
Temperature Range
35 C to 400 C
(95 F to 752 F)
Display Accuracy
0.5 C to 200 C
1.0 C to 400 C
Stability
0.2 C to 300 C
0.3 C to 400 C
Resolution
0.01
Uniformity
0.3 C at 100 C
0.6 C at 200 C
0.9 C at 300 C
1.4 C at 400 C
Heating Time
25 C to 400 C: 22 minutes
Cooling Time
400 C to 100 C: 65 minutes
Stabilization Time
8 minutes
Controller
Fluke Calibration Model 2200, microprocessor based, with RS-232
Readout
C or F, switchable
Sensor
RTD, 100_
Heater
325-watt, solid-state controlled
Surface Plate
6061 aluminum; top surface machine finished to 0.0008 mm (0.000032 in), 96 mm (3.8 in) diameter accessible
Power
115 VAC (10 %), 2.8 A or 230 VAC (10 %), 1.4 A, specify, 50/60 Hz, 325 W
Weight
3.2 kg (7 lb.) with 2200 Controller
NIST-Traceable Calibration
Data at 50 C, 120 C, 190 C, 260 C, 330 C, and 400 C

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.