The MS2683A Spectrum Analyzer delivers optimum performance over the wide dynamic range (156 dB, typical value), wide resolution bandwidth (20 MHz), and the high-speed sweep (refresh rate of 20 times/s), required for evaluating next-generation radio communication systems and devices.

With optional analysis software, the MS2683A becomes more than a Spectrum Analyzer as it performs analysis on digital communication standards.

This product has been discontinued.Replacement Model(s) : MS2830A

W-CDMA : W-CDMA Measurement Software
GSM : GSM Measurement Software
cdmaOne, CDMA2000 1X : CDMA Measurement Software
CDMA2000 1xEV-DO : CDMA2000 1xEV-DO Measurement Software
PDC/PHS/NADC (IS-136), STD-39/T79, STD-T61 : /4DQPSK Measurement Software
IEEE802.11a/11b/11g, HiSWANa, HiperLAN2 : Wireless LAN Measurement Software
TD-SCDMA : TD-SCDMA Measurement Software
Precision frequency reference : Aging rate: 5 1010/day
Narrow resolution bandwidth (FFT) : 1 Hz to 1 KHz
Extension of Preselector lower limit : Extends the lower frequency from 3.15 GHz to 1.6 GHz
Digital resolution bandwidth (RMS detection) : Adds RMS detection and expands resolution bandwidth to 10 Hz to 1 MHz
Pre-amplifier : Installs a pre-amplifier with 20 dB gain typical value and frequency range from 100 kHz to 3 GHz
Ethernet interface : Allows external control via 10BASE-T
I/Q balanced input : Mounts 4 connectors for I/Q sync input and operating input (BNC type) to the front panelMeasurement software corresponding to I/Q input is required for actual measurement
I/Q unbalanced input : Mounts 2 connectors for I/Q synch inputs and operating inputs (BNC type) to the front panelMeasurement software corresponding to I/Q input is required for actual measurement
4 GHz LO output : Outputs internal 2nd local signal through rear connector
Auto power recovery : Disables the power switch on the front panelPower is automatically reset after the line is restored
Rack mount (IEC) without handles : Mounts an IEC standard rack mountEliminates the standard tilt handle
Rack mount (JIS) without handles : Mounts a JIS standard rack mountEliminates the standard tilt handle

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.