The MW100 is a scalable, high performance data acquisition/data-logging platform designed for both PC-controlled and stand-alone operation under harsh operating conditions.

“Smart Logging” – Anytime, Anyplace
The MW100 is a scalable, high performance data acquisition/data-logging platform designed for both PC-controlled and stand-alone operation under harsh operating conditions. Open Ethernet connectivity with web-based configuration and data monitoring functions allow MW100 to handle a wide range of monitoring and historical logging functions. See real time trends with your web browser from any PC and no special software. A full range of input/output modules handle all of your process inputs with fast measurement speed and high noise immunity for rock-solid performance.Anytime, Anyplace…In a wide range of temperatures: -20 to 60 1,2,3,4
Reinforced insulation: Between input terminal and case5
3700 Vrms (one minute) or 600 Vrms/VDC (continuous)
A wide variety of network functions: HTTP, FTP, DHCP, SNTP, E-mail, and others
DC power supply (12 V-28 V) option available
Smart Logging…High speed measurement with a single unit (10 channels/10 ms or 60 channels/100 ms):
Shortest measurement interval of 10 ms
Multi-interval: Enables mixing of three different measurement intervals in a single unit
(measurement intervals can be set for each module)
Supports CompactFlash (CF) cards6 of up to 2 GB
Continuous data acquisition is possible on 60 channels at 100 ms for approximately ten days with a 2-GB card, or for three months on 60 channels at 1 s.
MATH function on the main module available with the /M1 option.
Collective data acquisition on 360 channels (via Modbus with the /M1 option)
The operating temperature range for the input modules and main module. The operating temperature range of the output modules is -20 to 50.
Note that the power cord supplied with the main module differs depending on the operating temperature range (see the specifications on page 7). If the operating temperature range specification of the supplied standard power cord does not meet your requirements, we recommend that you select a screw-type terminal rather than the plug type for the main module power inlet, and supply your own power input cable.
The operating temperature range of the AC adapter used with DC power supplies is 0 to 40.
Please consult with a representative for applications involving temperatures below -20.
The withstand voltage value with the MX110 input module. For the withstand voltage values of other input and output modules, please refer to the specifications for those modules (GS 04M10B01-01E).
CF card not included (sold separately).
System Configuration
Standard Configuration
A custom MW100 measuring system is comprised of three elements; the MW100 main module, MX Series input/output modules, and MX150 Series base plate. The system can be bench mounted as-is or DIN rail mounted for rack or panel installations. A DIN rail-mounting bracket is included with the MX150.
The input/output modules, base plate, and accessories are all the same as those for the MX100 DAQMASTER series (AC adapter is for the MW100 only).
Input Modules
and main module. The operating temperature range of the output modules is -20 to 50.
Note that the power cord supplied with the main module differs depending on the operating temperature range (see the specifications on page 7). If the operating temperature range specification of the supplied standard power cord does not meet your requirements, we recommend that you select a screw-type terminal rather than the plug type for the main module power inlet, and supply your own power input cable.
The operating temperature range of the AC adapter used with DC power supplies is 0 to 40.
Please consult with a representative for applications involving temperatures below -20.
The withstand voltage value with the MX110 input module. For the withstand voltage values of other input and output modules, please refer to the specifications for those modules (GS 04M10B01-01E).
CF card not included (sold separately).

Output Modules
handle all of your process inputs with fast measurement speed and high noise immunity for rock-solid performance.Anytime, Anyplace…In a wide range of temperatures: -20 to 60 1,2,3,4
Reinforced insulation: Between input terminal and case5
3700 Vrms (one minute) or 600 Vrms/VDC (continuous)
A wide variety of network functions: HTTP, FTP, DHCP, SNTP, E-mail, and others
DC power supply (12 V-28 V) option available
Smart Logging…High speed measurement with a single unit (10 channels/10 ms or 60 channels/100 ms):
Shortest measurement interval of 10 ms
Multi-interval: Enables mixing of three different measurement intervals in a single unit
(measurement intervals can be set for each module)
Supports CompactFlash (CF) cards6 of up to 2 GB
Continuous data acquisition is possible on 60 channels at 100 ms for approximately ten days with a 2-GB card, or for three months on 60 channels at 1 s.
MATH function on the main module available with the /M1 option.
Collective data acquisition on 360 channels (via Modbus with the /M1 option)
The operating temperature range for the input modules and main module. The operating temperature range of the output modules is -20 to 50.
Note that the power cord supplied with the main module differs depending on the operating temperature range (see the specifications on page 7). If the operating temperature range specification of the supplied standard power cord does not meet your requirements, we recommend that you select a screw-type terminal rather than the plug type for the main module power inlet, and supply your own power input cable.
The operating temperature range of the AC adapter used with DC power supplies is 0 to 40.
Please consult with a representative for applications involving temperatures below -20.
The withstand voltage value with the MX110 input module. For the withstand voltage values of other input and output modules, please refer to the specifications for those modules (GS 04M10B01-01E).
CF card not included (sold separately).
Base Plate
. The system can be bench mounted as-is or DIN rail mounted for rack or panel installations. A DIN rail-mounting bracket is included with the MX150.
The input/output modules, base plate, and accessories are all the same as those for the MX100 DAQMASTER series (AC adapter is for the MW100 only).
Accessories
are all the same as those for the MX100 DAQMASTER series (AC adapter is for the MW100 only).
Accessories (Removable Terminal)
Advanced Data Logging
Multi-AccessThe MW100 can be connected to multiple PCs at the same time. This allows monitoring and sharing of measured data by multiple users. A login function is included to enable assigning of access rights.
Measurement Information Shared

Measured Data Shared* Mail Server Required
Acquire up to 360 Channels in One System
A large data acquisition system of up to 360 channels can be assembled using multiple MW100s and standard MODBUS TCP Ethernet communications. When equipped with the /M1 math option, the MW100 can acquire up to 300 channels of external data from additional MW100 units or other devices such as a PLC using MODBUS TCP communications. This provides a total system capacity of 360 channels (60 built-in measure channels + 300 external).
Serial MODBUS RTU communications (RS- 232 or RS-422A/485) can be ordered as a separate option with the same capability.
Connect to Other Devices
An optional serial MODBUS RTU interface provides data exchange functions with other devices such as recorders, PLCs and controllers. In this mode, MW100 can serve as expansion I/O or as a data acquisition terminal for another connected device.
Remote Data Acquisition

Screen updating may be slower depending on the communication environment.
When the measurement location is located remotely from the data monitoring station, a dial up phone connection can be used for communications. All MW100 web browser-based data monitoring and FTP functions can be used via this connection for remote data acquisition applications.
Time Synchronization

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.