No Current Sellers for Wayne Kerr 6430B
Sign Up/Login to get notified when someone has one for sale.
Wayne Kerr 6430B Precision Component Analyzer (20 Hz to 500 kHz)
Product Details
-
Manufacturer: Wayne Kerr
-
Model: 6430B
-
Description:
High precision measuring instruments can be sensitive to charged capacitors and if connected can lead to costly repairs and unacceptable downtime. Wayne sales@wayne-kerr.co.uk Electronics have identified this problem and developed a solution that protects the test equipment from charged capacitors.
In this event, the protection unit blows fuses, which can be easily and cheaply replaced, whilst the test equipment remains unharmed and continues to provide reliable accurate performance.
The protection unit will protect the test equipment from up to 25 Joules of charged energy.
High precision measuring instruments can be sensitive to charged capacitors and if connected can lead to costly repairs and unacceptable downtime. Wayne sales@wayne-kerr.co.uk Electronics have identified this problem and developed a solution that protects the test equipment from charged capacitors.
In this event, the protection unit blows fuses, which can be easily and cheaply replaced, whilst the test equipment remains unharmed and continues to provide reliable accurate performance.
The protection unit will protect the test equipment from up to 25 Joules of charged energy.
Technical Specifications
Measurement parameters
Any of the following parameters can be measured and displayed:
Inductance (L), impedance (Z), DC resistance (Rdc) and capacitance ©
Series or Parallel Equivalent Circuit C+R, C+D, C+Q, L+R, L+Q
Series equivalent circuit only X+R, X+D, X+Q
Parallel equivalent circuit only C+G, B+G, B+D, B+Q
Polar Form Z + Phase Angle, Y + Phase Angle
Test conditions
Frequency range 6430B
20 Hz to 500 kHz > 1000 steps ( >1500 steps with analysis option fitted)
Accuracy of set frequency 0.005%
Frequency range 6440B
20 Hz to 3 MHz > 1800 steps
Accuracy of set frequency 0.005%
Pre-set frequencies
20, 25, 30, 40, 50, 60, 80, 100, 120, 150 repeats for each decade
Drive level (Rdc)
100 mV or 1 V with 100 _ source resistance
Drive level (AC measurements)
1 mV to 10 V rms*
50A to 200mA rms*
*Varies with frequency
Automatic Level Control (ALC) maintains constant voltage or current at DUT
Signal source impedance 50 _
DC bias voltage (internal)
2 V with rapid charge capacitor bias
DC bias voltage (external)
External supply of up to 60 V may be connected via rear panel
Measurement speeds
Four selectable speeds for all measurement functions.
Up to 20 measurements per second for test frequencies _100 Hz
Measurement ranges
R, Z 0.01 m_ to > 2 G_
G, Y 1 nS to > 2 kS
L 0.1 nH to > 2 kH
C 1 fF to > 1 F
D 0.00001 to >1000
Q 0.00001 to >1000
Rdc 0.1 m_ to > 10 M_
Basic accuracy
L/C 0.05%
R 0.02%
Q 0.05 (Q + 1/Q)
D 0.0002(1+ D2)
Rdc 0.1
Accuracy varies with component range measurement speed and frequency
Modes of operation
Measurement
Selection of any measurement parameter and test condition
Single level function menu controlled by keyboard and soft keys
Single and repetitive measurements displaying major and minor terms
Deviation
As measurement mode but relative or percentage deviation from nominal value displayed for major or minor term
Multi-frequency
Measurement parameters and test conditions set using measurement mode
Up to 8 frequencies with absolute or percentage limits on major term Pass/Fail indication
Multi-frequency capacitor (optional)
Test condition set using measurement mode.
Up to 8 frequencies with different measurement parameters.
Binning result in up to 10 bins with percentage limits on major term and absolute on minor.
Fast mode up to twice the speed of standard multi-frequency mode.
Analysis mode (optional 6430B)
Measurements parameters and test conditions set using measurement mode
Graphical sweep vs. frequency or level with selection of start, step size, units and linear/log.
Binning (optional)
Measurement parameters and test conditions set using measurement mode.
10 bins with absolute and percentage limits.
Up to 99 sets of limits may be saved.
25 way D-type interface connector.
Option /B1 (non-isolated)
Common 0 V. Bin outputs 0 to 5 V(nominal) with >10 mA current sink capability.
Option /B2 (isolated)
Common 24 V input. Outputs 0 to 24 V with >10 mA current source capability.
Measurement connections
4 front panel BNC sockets
4-wire (Kelvin) measurements with screen at ground potential
General
Power requirements
115 V or 230 V AC 10% (selectable)
150 VA Max
Mains frequency
50/60 Hz
Mains fuse rating
230 V operation – 1A T type
115 V operation _ 2A T type
Display
High contrast monochrome LCD module
320 × 240 with back lighting, Visible area 115 × 86 mm
Viewing angle 45
Printer output
Centronics / parallel printer port
Remote control
Conforms with GPIB-IEEE 488.2 and SCPI 1992.0
Mechanical
Height 150 mm (5.9_)
Width 440 mm (17.37_)
Depth 525 mm (20.5_)
Weight 11 kg (24.25 lb)
Environmental conditions
Temperature Range
Storage -40C to 70C
Operating 0C to 40C
Full Accuracy 15C to 35C
Relative humidity
Up to 80% non-condensing
Altitude
Up to 2000m
Installation category
II in accordance with IEC664
Pollution degree
2 – mainly non-conductive
This equipment is intended for indoor use only in a non-explosive and non-corrosive atmosphere
Safety
Complies with the requirements of EN61010-1
EMC
Complies with EN61326 for emissions and immunity
Fast automatic capacitor testing
High measurement accuracy on dissipation factor
Fast measurement speed
0.02% basic measurement accuracy
Comprehensive measurement functions
Graphical sweep on all measurement functions
Characterize components to 3 MHz
Large LCD display and intuitive user interface
Unbeatable price
Product Average Rating: (0 reviews)
There are no reviews for this product at the moment
