Take the trial and error out of fluorescent light testing.

Save time and reduce costs by using the only tester that performs all 5 essential lighting tests in less than 30 seconds.

• Lamp test: Test bulb without removing from fixture
• Ballast test: Easily determine if ballast is working
• Non-contact voltage: Quickly check for voltage presence
• Pin continuity test: Tests if filaments have continuity
• Ballast-type test: Determine if ballast is electronic or magnetic without taking fixture apart – identify energy wasting ballasts

If your job requires keeping large numbers of fluorescent lights shining, the Fluke 1000FLT is an indispensable tool.

• Lamp test max output    3000 V peak
• Ballast test    20 kHz
• Ballast type descriminator    ≤3m (10 feet) distance
• Pin continuity test    < 1 kΩ
• NCV (VoltAlert™)    85 to 400 V AC
• 45 a 67 Hz
• ≤10 cm (4 in) distance
• Environmental Specifications
• Temperature    Operating: -10 °C to +50 °C (14 °F to +122 °F)
• Storage: -40 °C to +60 °C (-40 °F to +140 °F)
• Relative humidity    85% maximum
• Safety Specifications
• Safety rating    IEC 61010-1, pollution degree 2
• Mechanical and General Specifications
• Size    21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in)
• Weight    0.37 kg (0.80 lb.)
• Battery type    4 x AA alkaline IEC LR6
• Battery life    40 hours
• Auto power off    20 minutes after non-use
• Low battery indicator    Power button light blinks when power is low (typically 85% of capacity depleted)
• Operating altitude    <2000 m
• Electromagnetic environment    EN 61326-1: Portable
• Electromagnetic compatibility    CE IEC: CISPR 11: Grupo 2, clase AGroup 2 contains all ISM RF equipment in which radio-frequency energy in the frequency range 9 kHz to 400 GHz is intentionally generated and used or only used, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purposes
• Class A equipment is suitable for use in non-domestic locations and/or directly connected to a low-voltage power supply network
• EE.UU. FCC part 15, subpart B: exempt as test equipment per clause 15.103
• Korea only Clas A Equipment (Industrial Broadcasting & Communication Equipment)1
• 1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
• Resistance to impact    2 meter drop
• Warranty    3 years

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.