Worlds widest range of single-connection measurement applications
The PNA-X network analyzer is the worlds most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 8.5 (N5249A) 13.5 (N5241A), 26.5 (N5242A), 43.5 (N5244A), 50 (N5245A), and 67 GHz (N5247A). The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.

Replace racks and stacks
Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.

Applications:

S-parameters (CW and pulsed)

Noise figure

Gain compression

Intermodulation and harmonic distortion

Conversion gain/loss

True-differential stimulus

Millimeter-wave

Nonlinear waveform and X-parameter* characterization – See Measurement Solution Example:X-Parameter Measurements

Antenna test

PNA Firmware, Upgrade and Support

10 MHz to 26.5 GHz

2- or 4-ports with two built-in sources

132 dB system and 130 dB receiver dynamic range, 100,001 points,200 channels, 15 MHz IF bandwidth

High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)

Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver

Low noise floor of -114 dBm at 10 Hz IFBW

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.