Need more hours in your day?Save time by NOT breaking the loop on 4-20 mA signal measurements.Are you spending time: Taking mA measurements by removing a wire and breaking the loopCalling the control room to isolate a loopTesting analog input/output on a consoleTroubleshooting devices with mA inputs and outputsRepairing intermittent or erratic 4-20 mA loopsGoing back to the shop to get extra toolsIf you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.Here are some specific ways the Fluke 771 Clamp Meters will help you:

Milliamp Clamp Features

Application

How it saves time and moneyMeasure mA signals for PLC and control system analog I/O without breaking the loop.

Measures low level dc current

Correlate process indication with real physical value Measure output signals from transmitters without breaking the loop

Maintain and troubleshoot process and automation equipment without breaking the loop

No disruption to the process Detachable clamp with extension cable

Measurements in tight locations

Enables measurements in difficult situations Measurement Spotlight

Illuminates hard to see wires in dark enclosures

Measurement process is easier and quickerMeasure up to 99.9 mA range non-contact

Wide range of measurements

Measures 10 to 50 mA signals in older control systemsAutomatic power off

After 15 minutes and 2 minute automatic off for backlight and spotlight

Saves battery life

The 771 mA Clamp Meter features: Best in class 0.2 % accuracy0.01 mA resolution and sensitivityMeasure 4 to 20 mA signals without breaking the loop Measure mA signals for PLC and control system analog I/ODual backlit display with both mA measurement and percent of 4 to 20 mA spanMeasurement Spotlight illuminates hard to see wires in dark enclosuresDetachable clamp with extension cable for measurements in tight locationsMeasure 10 to 50 mA signals in older control systems using the 99.9 mA rangeAutomatically change the 4 to 20 mA output for remote testingPower saving features, auto-off, backlight timeout extend battery lifeHold function captures and displays changing measurementsWhat’s the difference between the 77X models?

.

Fluke-771

Fluke-772

Fluke-773 .

Non-contact mA loop measurement

Integrated mA loop troubleshooting

Advanced process troubleshootingmA measure, jaw

mA measure, in circuit

.

Loop power

.

mA source

.

DCV measure

.

.

DCV source

.

.

mA scaled output

.

.

mA in / out

.

.

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.