Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

Taking mA measurements by removing a wire and breaking the loop

Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 772 Clamp Meters will help you:

Milliamp Clamp Features Application How it saves time and money Measure mA signals for PLC and control system analog I/O without breaking the loop Measures low level dc current Correlate process indication with real physical value Measure output signals from transmitters without breaking the loop Maintain and troubleshoot process and automation equipment without breaking the loop No disruption to the process Detachable clamp with extension cable Measurements in tight locations Enables measurements in difficult situations Measurement Spotlight Illuminates hard to see wires in dark enclosures Measurement process is easier and quicker Measure up to 99.9 mA range non-contact Wide range of measurements Measures 10 to 50 mA signals in older control systems Automatic power off After 15 minutes and 2 minute automatic off for backlight and spotlight Saves battery life

The 772 mA Clamp Meter features: Best in class 0.2 % accuracy0.01 mA resolution and sensitivityMeasure 4 to 20 mA signals without breaking the loop Measure mA signals for PLC and control system analog I/ODual backlit display with both mA measurement and percent of 4 to 20 mA spanMeasurement Spotlight illuminates hard to see wires in dark enclosuresDetachable clamp with extension cable for measurements in tight locationsMeasure 10 to 50 mA signals in older control systems using the 99.9 mA rangeAutomatically change the 4 to 20 mA output for remote testingPower saving features, auto-off, backlight timeout extend battery lifeHold function captures and displays changing measurementsMeasure 4 to 20 mA signals with in-circuit measurementSimultaneous mA in-circuit measurement with 24V loop power for powering and testing transmittersSource 4 to 20 mA signals for testing control system I/O or I/PsmA output linear ramp or 25% step outputAutomatically change the 4 to 20 mA output for remote testingWhat’s the difference between the 77X models?

.

Fluke-771

Fluke-772

Fluke-773 .

Non-contact mA loop measurement

Integrated mA loop troubleshooting

Advanced process troubleshootingmA measure, jaw

mA measure, in circuit

.

Loop power

.

mA source

.

DCV measure

.

.

DCV source

.

.

mA scaled output

.

.

mA in / out

.

.

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.