Leakage current measurement range from 3mA to 60A
Diameter of measurable conductor: 40 mm max.
Easier and clear display

Specifications

Description
Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp

Method of detection
Mean Value

Display
(Bar-graph display: 32 segments) LCD (Digital display: 3200 counts)

Range Switching
Auto-range

Operating temperature and humidity
0 – 50°, 80% RH or less (no condensation)

Influence of external magnetic field
0.0005% typical 1 (on current value of adjacent cable)

Influence of conductor position
Within accuracy

Safety Standard
Approved for conformity to EN 61010-1,EN 61010-2-032

Circuit voltage
300 Vrms or less

Withstanding voltage
3.7 kV AC for one minute

Power Supply
One CR2032 (Coin-shaped) 3 V battery

Battery Life
Approx. 90 hours (when continuously used)

Auto power-off
Approx. 10 minutes

Diameter of measurable conductor
40 at maximum mm

Dimensions
Approx. 70 (W) x 176 (H) x 25 (D) mm

Weight
Approx. 200 g

Accessories
Instruction manual, battery, Soft case

AC Current
3/30 mA, 30/60A

Frequency Characteristics
50/60 Hz

Accuracy (50/60Hz)
1.0 + 5 (0~30mA) 1.0 + 5 (0~50A) 5.0 + 5 (50~60A)

Measurement Cycle
2 times/second (Digital display), 12 times/second (Bar-graph display)

Temperature Coefficient
0.05% of range /°C or less (within the ranges of 0-18° and 28-50° for measurement of 0-50 A)

Note

Can measure leakage currents of 1 mA, which is useful for checking the insulation of low-voltage circuits and electrical components.
Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60 A.
Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%.
Durability of clamp: More than 50,000 opening/closing events
Twice the tensional strength of Yokogawa M&C’s earlier model clamps
The clamp lever is lengthened by 30%, enabling smooth opening/closing of the clamp even for thick cables of 40mm in diameter.
Approved for conformity to safety standards EN 61010-1 and EN 61010-2-032 (CAT III 300V, pollution degree2)

Selection Guide

DC Current Range
-

DC Current Resolution
-

AC Current Range
3/30mA 30/60A

AC Current Resolution
0.001mA

AC Current Frequency characteristics
50/60Hz

AC Current Method of detection
Mean Value

AC Voltage Measurement
-

DC Voltage Measurement
-

Continuity Check Measurement
-

Frequency Measurement
-

Temperature Measurement
-

Recorder output Function
-

Waveform monitor output Function
-

Data hold Function
O

Auto hold Function
-

Peak Hold Function
-

Maximum value memory Function
-

Mean value display Function
-

Filter Function
-

Range Hold Function
-

Auto ZERO Adjust Function
-

Auto power-off Function
O

Additional Specification
At 23°C±5°C_75%RH or less Accuracy: ±( % rdg + dgt) = ±(% readout + value of least significant digit)

AC current
3/30mA, 30/60A

Frequency characteristics
50/60Hz

Accuracy
50/60Hz
1.0 + 5(0~30mA)

1.0 + 5(0~50A)

5.0 + 5 (50-60A)

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.