13 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Unit

The Ultimate in Performance

Up to 45 GHz

Up to 80 Channels @ 20 GHz

Up to 120 GS/s

Up to 768 Mpts/Ch

LabMaster 9 Zi-A modular oscilloscope systems completely re-define oscilloscope performance and capabilities.

Multi-channel operation at the highest bandwidths

20 channels @ 45 GHz

40 channels @ 36 GHz

80 channels @ 20, 16, or 13 GHz

Bandwidth and channel upgrade flexibility

ChannelSync for precise synchronization of all acquisition modules

Server-class CPU (33.6 GHz effective clock rate, up to 192 GB RAM)

Ultra-low jitter noise floor (125 fs rms) and ultra-high time base stability.

LabMaster 9 Zi-A provides more of everything, and it’s modular design provides the simplest upgrade path in bandwidth and channel count. ChannelSync ensures precise synchronization of all channels in all acquisition modules using a single-distributed 10 GHz clock and a single trigger circuit. The result is the highest timebase accuracy and an ultra-low 275 fs jitter between all channels, identical to that provided with a single, standard oscilloscope package.

Upgrade flexibility is designed instart with a minimum configuration and add channels over time by simply adding additional acquisition modules, upgrade bandwidth on existing modules, or mix and match bandwidths in one system. A server-class CPU packs additional processing power for the immense amounts of data made possible by LabMaster 9 Zi-A.

LabMaster enables the leading-edge technologies that provide enhanced high speed data transfer and communicationsuch as 28 32 Gb/s SERDES, multi-lane serial data (40/100 GbE, PCIe Gen3), DDR, and optical coherent modulation communications. It’s also ideal for defense and aerospace applications where high channel count and high bandwidth are both required.

LabMaster 913SZi-A : 13 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm Inputs
LabMaster 916SZi-A : 16 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm inputs.
LabMaster 920SZi-A : 20 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm inputs.
LabMaster 930SZi-A : 30 GHz, 80 GS/s, 40 Mpts/Ch Digital Bandwidth Interleaved (DBI) Slave Acquisition Module, 50 ohm Inputs. Also operates in 20 GHz, 40 GS/s, 4ch, 20 Mpts/Ch mode.
LabMaster CMH20-Zi : ChannelSync Mainframe Hub to permit LabMaster expansion to up to 20 acquisition modules. Also requires one LabMaster CHM-1ACQMODULE-Zi card for each acquisition module to be connected.
LabMaster CMH-1ACQMODULE-Zi : Expansion ChannelSync module card for ChannelSync Mainframe Hub
MS-500 : 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36 : 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option
MS-250 : 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option
LM9Zi-S-32 : 32 Mpt/Ch (four channel operation) Memory Option for LabMaster 9 Zi-A 64 Mpt/Ch in 30/36 GHz Mode, 96 Mpt/Ch in 45 GHz Mode (when applicable)
LM9Zi-M-64 : 64 Mpt/Ch (four channel operation) Memory Option for LabMaster 9 Zi-A 128 Mpt/Ch in 30/36 GHz Mode, 192 Mpt/Ch in 45 GHz Mode (when applicable)
LM9Zi-L-128 : 128 Mpt/Ch (four channel operation) Memory Option for LabMaster 9 Zi-A 256 Mpt/Ch in 30/36 GHz Mode, 384 Mpt/Ch in 45 GHz Mode (when applicable)
LM9Zi-VL-256 : 256 Mpt/Ch (four channel operation) Memory Option for LabMaster 9 Zi-A 512 Mpt/Ch in 30/36 GHz Mode, 768 Mpt/Ch in 45 GHz Mode (when applicable)
SDA9Zi-M-64 : 64 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with SDA MCM-Zi
SDA9Zi-L-128 : 128 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with SDA MCM-Zi
SDA9Zi-VL-256 : 256 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with SDA MCM-Zi
DDA9Zi-M-64 : 64 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with DDA MCM-Zi
DDA9Zi-L-128 : 128 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with DDA MCM-Zi
DDA9Zi-VL-256 : 256 Mpt/Ch Memory Option for LabMaster 9 Zi-A Acquisition Modules used with DDA MCM-Zi
WM8Zi-2X80GS : 80 GS/s on 2ch Sampling Rate Option for WaveMaster/SDA/DDA 8 Zi and 8Zi-A (not available for 820Zi, 825Zi/Zi-A, 830Zi/Zi-A, 9×30Zi-A, 845Zi-A or 9×45Zi-A). Includes two separate external interleaving devices with storage case.
LM9Zi-500GB-RHD-02 : Additional 500 GB Hard Drive for LM9MZi-A. Includes Windows 7 OS, LeCroy oscilloscope software and critical scope operational file duplicates.
LM9Zi-24-UPG-96GBRAM : Upgrade from 24 GB to 96 GB CPU RAM at time of initial shipment
LM9Zi-24-UPG-192GBRAM : Upgrade from 24 GB to 192 GB CPU RAM at time of initial shipment
LM9Zi-VIDEOCARD-Zi-EXTDISP-15 : Replacement LabMaster 9xxMZi-A CPU Video Card to support Zi-EXTDISP-15 Integrated Second Touch Screen Display Accessory
GPIB-3 : GPIB Option for LabMaster MCM-Zi
LM9Zi-PWR : Power Analysis Option for LM 9 Zi
LM9Zi-USB2-HSICbus D : USB 2.0 HSIC Decode Option
LM9Zi-ENET10Gbus D : ENET 10G Decode Option
LM9Zi-64b66b D : 64b66b Decode Option
LM9Zi-1553 TD : MIL-STD-1553 Trigger and decode option for LabMaster 9Zi Series
LM9Zi-MPHYbus D : MIPI M-PHY Bus Decode option for LabMaster 9Zi series
LM9Zi-MPHYbus DP : MIPI M-PHY Bus Decode and Physical Layer test option for LabMaster 9Zi series
LM9Zi-DPHYbus DP : MIPI D-PHY Bus Decode and Physical Layer test option for LabMaster 9Zi series
LM9Zi-CAN FDbus TD : CAN FD Trigger and Decode Option for LabMaster 9Zi Oscilloscopes
LM9Zi-8B10B D : 8b10b Decode Option for LabMaster 9Zi Series
LM9Zi-ARINC429bus Dsymbolic : ARINC 429 Bus Symbolic Decode option for LabMaster 9Zi
LM9Zi-VBA : Vehicle Bus Analyzer Bundle Includes CAN TDM, CAN Symbolic, FlexRay TDP, LIN TD and Protobus MAG.
LM9Zi-AUDIOBUS TD : AudioBus trigger and decode for LabMaster 9Zi Series
LM9Zi-AUDIOBUS TDG : AudioBus trigger, decode, and graph for LabMaster 9Zi Series
LM9Zi-CANBUS TD : CAN Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-DigRF3Gbus D : DigRF 3G Bus Decode option for LabMaster 9Zi Series
LM9Zi-DigRFv4bus D : DigRF V4 Bus Decode option for LabMaster 9Zi Series
LM9Zi-Manchesterbus D : Manchester Bus Decode Option for LabMaster 9Zi
LM9Zi-ENETbus D : ENET Bus Decode Option for LabMaster 9Zi
LM9Zi-DPHYbus D : D-PHY Bus Decode option for LabMaster 9Zi Series
LM9Zi-EMB : Embedded bundle, Includes I2C TD, SPI TD, UART TD
LM9Zi-SpaceWirebus D : SpaceWire Decode Option for LabMaster 9Zi series
LM9Zi-FCbus D : FibreChannel decode annotation option for LabMaster 9Zi Series
LM9Zi-FLEXRAYBUS TD : FlexRay Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-FLEXRAYBUS TDP : FlexRay Bus Trigger, Decode, and Physical Layer Test Option for LabMaster 9Zi Series
LM9Zi-I2CBUS TD : I2C Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-LINBUS TD : LIN Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-MSO-EMB : Embedded bundle, Includes MS-500-36 with I2C TD, SPI TD, UART TD
LM9Zi-PCIEBUS D : PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for LabMaster 9Zi Series
LM9Zi-PROTOBUS MAG : Serial Debug Toolkit – Measure Analyze Graph for LabMaster 9 Zi series. Compatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553
LM9Zi-PROTOSYNC : Decode Annotation and Protocol Analyzer Software Synchronization Option for LabMaster 9Zi Series
LM9Zi-PROTOSYNC-BT : Decode Annotation & Protocol Analyzer+Bit Tracer SW Synchronization Option for LabMaster 9Zi Series
LM9Zi-SASbus D : SAS decode annotation option for LabMaster 9Zi Series
LM9Zi-SATAbus D : SATA decode annotation option for LabMaster 9Zi Series
LM9Zi-SPIBUS TD : SPI Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-UART-RS232BUS TD : UART and RS232 Bus Trigger & Decode Option for LabMaster 9Zi Series
LM9Zi-USB2bus D : USB 2.0 Bus Decode option for LabMaster 9Zi Series
LM9Zi-USB3bus D : USB 3.0 Decode option for LabMaster 9Zi Series Supports USB 3.0, 2.0, 1.x
LM9ZI-UNIPRObus D : MIPI UniPro Protocol Decoder Software Option
LM9Zi-CAN FDbus TDM : CAN FDbus Trigger, Decode & Measure/Graph Option for LabMaster 9Zi
LM9Zi-CANbus TDM SYMBOLIC : CANbus Trigger, Symbolic Decode & Measure/Graph Option for LabMaster 9Zi Oscilloscopes
LM9Zi-CAN FDbus TDM SYMBOLIC : CAN FDbus Trigger, Symbolic Decode & Measure/Graph Option for LabMaster 9Zi Oscilloscopes
LM9Zi-6GBIT-80B-SYMBOL-TD : 80-bit NRZ, 8b/10b, and 64b/66b 6.5 Gbps Serial Trigger option for LabMaster 9 Zi-A May only be used with LabMaster 9 Zi-A System that contains a LabMaster 9xxMZi-A Master Acquisition Module
LM9ZI-SENTbus D : SENT Bus Decode Option for LabMaster 9Zi
LM9Zi-JITKIT : Clock Jitter Analysis Package for LabMaster 9 Zi Series
LM9Zi-DFP2 : Digital Filter Software Package for LabMaster 9 Zi Series
LSIB-HOSTBOARD : PCI Express x4 Host Interface Board for desktop PC
LSIB-HOSTCARD : PCI Express x1 Express Card Host Interface for laptop Express Card slot
LSIB-CABLE-3M : PCI Express x 4 3-meter cable with x4 cable connectors included
LSIB-CABLE-7M : PCI Express x 4 7-meter cable with x4 cable connectors include
LSIB-2 : High speed PCIe Gen1 x4 digitizer output for LabMaster MCM-Zi Master Control Module. Half-height card with bracket.
QPHY-BroadR-Reach : QualiPHY Enabled BroadR-Reach Compliance Software Option. Requires either SDA2 or JTA2
QPHY-MOST50 : QualiPHY Enabled MOST50 ePHY Compliance Software Option. Requires options DFP2 and SDM or SDA2
QPHY-MOST150 : QualiPHY MOST150 oPHY and cPHY Compliance Software Option. Requires options DFP2 and SDM or SDA2
LM9Zi-ET-PMT : Electrical Telecom Pulse Mask Test Package for LabMaster 9 Zi Series
LM9Zi-SDM : Serial Data Mask Software Package for LabMaster 9 Zi Series
QPHY-MIPI-DPHY : QualiPHY Enabled MIPI DPHY Compliance Software Option
QPHY-PCIe3 : QualiPHY Enabled PCIe 3.0 Compliance Software Option
LM9ZI-DDR2-TOOLKIT : DDR2 and LPDDR2 Debug Toolkit for LabMaster 9Zi Oscilloscopes
LM9ZI-DDR3-TOOLKIT : DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit for LabMaster 9Zi Oscilloscopes
LM9ZI-DDR4-TOOLKIT : DDR4, DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit for LabMaster 9Zi Oscilloscopes
LM9ZI-UPG-DDR3-TOOLKIT : DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit Upgrade for LabMaster 9Zi Oscilloscopes
QPHY-MIPI-MPHY : QualiPHY Enabled MIPI M-PHY Compliance Software Option
QPHY-DDR2 : QualiPHY Enabled DDR2 Compliance Software Option
QPHY-DDR3 : QualiPHY Enabled DDR3, DDR3L and LPDDR3 Compliance Software Option
QPHY-DisplayPort : QualiPHY Enabled DisplayPort Compliance Software Option
QPHY-ENET : QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option
QPHY-HDMI : QualiPHY Enabled HDMI Compliance Test Software
QPHY-LPDDR2 : QualiPHY Enabled LPDDR2 Compliance Software Option
QPHY-DDR4 : QualiPHY Enabled DDR4 Compliance Software Option
QPHY-10GBASE-T : QualiPHY Enabled 10GBASE-T Transmitter and Return Loss Compliance Test Software Option
QPHY-PCIe : QualiPHY Enabled PCIe Gen1 and Gen2 Compliance Software Option
QPHY-SAS2 : QualiPHY Enabled SAS2 (1.5 Gb/s, 3.0 Gb/s, and 6.0 Gb/s) Compliance Software Option
QPHY-SATA-TSG-RSG : QualiPHY Enabled SATA (PHY, TSG, RSG, and OOB) Compliance Software Option
QPHY-USB : QualiPHY Enabled USB 2.0 Compliance Software Option
QPHY-USB3-Tx-Rx : QualiPHY Enabled SuperSpeed Transmitter/Receiver Compliance Software Option
QPHY-UWB : QualiPHY Enabled WiMedia UWB Compliance Software Option
QPHY-USB3.1-Tx-Rx : QualiPHY Enabled USB3.1 Compliance Tx-Rx Software Option
ENET-2ADA-BNCSMA : Adapter Set- 2 BNC/M to SMA/F
ENET-2CAB-SMA018 : Cable Set- 2 SMA-SMA 18 inches
ENET-2CAB-SMA036 : Cable Set- 2 SMA-SMA 36 inches
QPHY-USB3.1-Tx : QualiPHY Enabled USB3.1 Compliance Tx Software Option
QPHY-SFI : QualiPHY Enabled SFI Compliance Software Option
QPHY-SAS3 : QualiPHY Enabled SAS3 (1.5 Gb/s, 3.0 Gb/s, 6.0 Gb/s, and 12.0 Gb/s) Compliance Software Option
LM9Zi-SDAIII-CompleteLinQ : Bundle – Multi-Lane SDA Framework, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII and VirtualProbe
SDA9Zi-CompleteLinQ : Bundle – Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe
DDA9Zi-CompleteLinQ : Bundle – Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe
LM9Zi-SDAIII-CrossLinQ : Multi-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
SDA9Zi-CrossLinQ : Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements
DDA9Zi-CrossLinQ : Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements
LM9ZI-PAM4 : PAM4 Serial Data Analysis, Eye, Jitter and Noise Measurements
LM9Zi-SDAIII-Crosstalk : Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
DDA9Zi-Crosstalk : Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
SDA9Zi-Crosstalk : Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
LM9Zi-SDAIII-LinQ : Multi-Lane Serial Data Analysis Framework, Eye and Jitter Measurements
SDA9Zi-LinQ : Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements
DDA9Zi-LinQ : Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements
LM9Zi-SDAIII : Single-Lane Serial Data Analysis Framework, Eye and Jitter Measurements
LM9Zi-EYEDRII-VP : Bundle – EyeDrII and VirtualProbe Toolkits
WM8Zi-EYEDRII-VP : Bundle – EyeDrII and VirtualProbe Toolkits
LM9Zi-EYEDRII : Signal Integrity Toolkit – Channel & Fixture De-embedding/Emulation, Tx/Rx Equalization
LM9Zi-VIRTUALPROBE : Advanced De-embedding, Emulation and Virtual Probing Toolkit
LM9Zi-CBL-DE-EMBED : Cable De-embedding Software Package for LabMaster 9 Zi Series
LM9Zi-SPECTRUM : Spectrum Analyzer Software Package for LabMaster 9 Zi Series
LM9Zi-EMC : EMC Pulse Parameter Software Package for LabMaster 9 Zi Series
KYBD-1 : Keyboard, USB
WM8Zi-SOFTCASE : Soft carrying case for all WaveMaster, SDA, and DDA 8 Zi Series, and LM 9 Zi series oscilloscopes. Holds any WM/SDA/DDA 8 Zi, LM 9xxMZi, or 9CZi “Master” Model.
TTL-AUX-OUT : TTL Auxiliary output adapter for 7Zi and 8Zi oscilloscopes
Rise-Time-Filter-100ps : PSPL Rise Time Filter – PSPL Part Number 5915-110-100ps
Rise-Time-Filter-150ps : PSPL Rise Time Filter – PSPL Part Number 5915-110-150ps
20dB-SMA-Attenuator : 20 dB SMA Attenuators
LM9Zi-SLAVE-CPU-SOFTCASE : Durable Softcase for LabMaster 9Zi Series. Holds LabMaster 9xxSZi-A “Slave” Module or 9xxMZi-A CPU
LM9Zi-PRO-TOWER : Professional Mobile Cabinet Tower for LabMaster 9 Zi Series. Holds qty. 1 Master, qty. 4 Slaves, and qty. 1 CPU Limited Availability
LM9Zi-MASTER-CPU-RACKMOUNT : Rackmount Ear Set for any LabMaster 9xxMZi-A Model. Set contains rackmount ears for the “Master” and the “CPU”.
LM9Zi-SLAVE-RACKMOUNT : Rackmount Ear Set for any LabMaster 9xxSZi-A “Slave” Model.
OC910 : Deluxe Oscilloscope Cart for LabMaster 9 Zi-A or LabMaster 10 Zi
MCM-Zi-RACKMOUNT : Rackmount for MCM-Zi
LM9Zi-AORM : Advanced Optical Recording Measurement Package for LabMaster 9 Zi Series
LM9Zi-DDM2 : Disk Drive Measurements Software Package for LabMaster 9 Zi Series
LM9Zi-DDA : Disk Drive Analysis Software Package for LabMaster 9 Zi Series
PK400-0 : Extra Large Gripper Probe Set . Includes 22 probes
PK400-1 : Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads
PK400-2 : Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads
PK400-3 : Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads
MSO-MICTOR : 36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)
MSO-3M : 18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)
MSO-DLS-36 : 16" Digital Lead Set, D18-D35
TF-ENET-B : 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK : HDMI Pull-Up Terminator Quad Pack – For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit : SATA Compliance Test Kit
TF-USB-B : USB 2.0 Compliance Test Fixture
TF-USB3 : SuperSpeed and SuperSpeedPlus USB Test Fixtures
TF-10GBASE-T : Test Fixture for 10GBase-T
TF-MIPI-MPHY-DUALPAK : MIPI M-PHY input offset adapter dual pack
LM9Zi-14GBIT-80B-SYMBOL-TD : 80-bit NRZ, 8b/10b, and 64b/66b 14.1 Gbps Serial Trigger option for LabMaster 9 Zi-A May only be used with LabMaster 9 Zi-A System that contains a LabMaster 9xxMZi-A Master Acquisition Module

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.