Quartz reference pressure transducer (Q-RPT) modules
PPCH’s outstanding pressure measurement specifications are made possible by Fluke Calibration’s exclusive quartz reference pressure transducer (Q-RPT) modules.
Q-RPTs measure pressure by measuring the change in the natural oscillating frequency of a quartz crystal with pressure induced stress. To be qualified for use in a Q-RPT module, each transducer is individually evaluated and characterized using automated primary pressure standards. Only transducers exhibiting required levels of linearity, repeatability and stability are selected. A proprietary compensation model, derived from more than 15 years experience with thousands of quartz pressure transducers, is applied to optimize the metrological characteristics needed in a transfer standard.
PPCH can be delivered with a low cost utility sensor for applications in which the high precision and stability of a Q-RPT are not required.

Q-RPTs available for PPCH

Q-RPT Designation

SI Version Maximum Range
Absolute Gauge (MPa)

US Version Maximum
Range AbsoluteGauge (psi)

A200M1

200

30 000

A140M1

140

20 000

A100M1

100

15 000

A70M

70

10 000

A40M

40

6 000

A20M

20

3 000

1. Hi Q-RPT only, not available in Lo Q-RPT position.

Infinite Ranging and autoRange
There is a lot more to covering a wide range of test devices with a single pressure controller than “% of reading” measurement uncertainty.
In addition to the necessary measurement uncertainty, PPCH offers the full pressure control and feature adaptability that are needed for true rangeability in test and calibration applications. Infinite ranging gives PPCH unprecedented versatility in adapting to a wide variety of devices to be tested. With the easy to use AutoRange function, a few simple key strokes or a single remote command string at the start of a test adapts every feature of the controller to optimize it for a specific range.
Open architecture
A PPCH controller can be configured with up to four Q-RPT modules. These can be internal or external to the PPCH controller. External Q-RPTs are in RPM4 Reference Pressure Monitors. The RPM4’s Q-RPTs then become part of the PPCH system and are managed by PPCH. External Q-RPTs must be disconnected or protected by valves when PPCH is used at pressure greater than the external Q-RPT range. Examples of possible PPCH system configurations include:
A PPCH with one or two built-in Q-RPTs to act as a stand alone, “one box” controller/calibrator package.
A PPCH with no internal Q-RPTs and an external Q-RPT to configure a system whose reference pressure measurement is remote from the controller. This configuration is ideal when it is advantageous for the reference to be removed from the system (e.g. for recalibration) while leaving the controller installed or to locate the reference measurement in closer proximity to the device or system under test.
A PPCH with no built-in Q-RPTs to act as a low cost automated pressure setting and controlling device (for example to automate pressure control in a PG7000 piston gauge system).
Features, features, features
PPCH includes all the features you expect in today’s state-of-the-art instruments and much more:
Pressure “ready/not ready” indicator with user adjustable criteria
Intelligent AutoZero function
16 SI and US pressure units
Automatic fluid pressure head correction
On-board, programmable calibration sequences with DUT tolerance testing
Remote [ENTER] footswitch for hands free test execution
Valve drivers option for system design
Automated leak testing routines
RS-232 and IEEE- 488 communications
FLASH memory for simple and free embedded software upgrades

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.