Series 2600 System SourceMeter instruments offer electronic component and semiconductor device manufacturers a scalable, high throughput, highly cost-effective solution for precision DC, pulse, and low frequency AC source-measure testing. Building on the tightly integrated source-measure technology originally developed for Keithley’s popular Series 2400 SourceMeter line, Series 2600 instruments provide from two to four times the test speed of competitive solutions in I-V functional test applications. They also offer higher source-measure channel density and a significantly lower cost of ownership than competing products. The analog-to-digital converters provide simultaneous I and V measurements in less than 100s (10,000 rdgs/s) and source-measure sweep speeds of less than 200s per point (5,500 points/s). This high speed source-measure capability, plus advanced automation features and time-saving software tools make Series 2600 SourceMeter instruments an ideal solution for I-V testing of a wide range of devices. Related Applications: I-V functional test and characterization of a wide range of devices, including: Discrete and passive components Two-leaded Resistors, disk drive heads, metal oxide varistors (MOVs), diodes, zener diodes, sensors, capacitors, thermistors Three-leaded Small signal bipolar junction transistors (BJTs), field-effect transistors (FETs), and more Parallel test Two- and three-leaded component arrays Simple ICs Optos, drivers, switches, sensors Integrated devices Small Scale Integrated (SSI) and Large Scale Integrated (LSI) Analog ICs Radio frequency integrated circuits (RFICs) Application specific integrated circuits (ASICs) System on a chip (SOC) devices Optoelectronic devices such as light-emitting diodes (LEDs), laser diodes, high brightness LEDs (HBLEDs), vertical cavity surface-emitting lasers (VCSELs), displays R&D and device characterization of these types of devices.

Precision power supply

True current source

5 1/2-digit multimeter

Voltage or current pulse generator with measurement

Low frequency arbitrary waveform generator

Electronic load

Trigger controller

Store up to 50,000 lines of TSP code and more than 200,000 readings in 16MB of nonvolatile memory

Measure I and V at >10,000 readings/s. Execute a full source-measure cycle in just 200s

Ensure repeatable timing and high throughput with the high speed auto-ranging function

GPIB, RS-232 and 14-bit digital I/O interface ports are standard

Current measure range (per channel) 1pA to 3A

Current source range (per channel) 5pA to 3A

Basic current programming accuracy 0.03%

Basic current measurement accuracy 0.02%

Voltage measure range (per channel) 1V to 40V

Voltage source range (per channel) 5V to 40V

Basic voltage programming accuracy 0.02%

Basic voltage measurement accuracy 0.015%

Readings to memory 10,000/s

Sweep source change and reading to memory 5,500/s

Sweep source change and reading to GPIB 3,600/s

Spot readings to GPIB 1,100/s

Spot source change and reading to GPIB 880/s

Pulse capability 200s minimum source/measure pulse

Product Average Rating:

(0 reviews)

No current Alternatives.
You may find Alternatives in category.